I will detail my build of an Autoquad 6 based folding quad here which I will use for FPV flying.
The frame is called CamCruiser FPV and is available at http://www.copter4you. An all-CFK version will also be available in the near future.
Some pics of the frame:
- CamCruiser_02.jpg (59.75 KiB) Viewed 34195 times
- CamCruiser_07.jpg (91.2 KiB) Viewed 34195 times
- CamCruiser_09.jpg (97.97 KiB) Viewed 34195 times
The size of the quad is 44x26cm when folded and 51x55cm un-folded.
Here's the 'lineup' of the other components:
- Autoquad 6 FC (what else )
- ESC32 (CAN-bus, 3x 470µF/35V low ESR caps)
- T-Motor MN3510 630KV (http://www.rctigermotor.com/html/2013/N ... 10/37.html)
- Graupner E-Prop 12x6in (will maybe change to CFK props later on)
- HD Hero 3 Gimbal with 2-axis controller board
- up to two 6000mAH 4S1P Lipos (http://www.hobbyking.com/hobbyking/stor ... ouse_.html) or one 10000mAH 4S1P SLS APL Lipo (http://www.stefansliposhop.de/liposhop/ ... :1094.html)
- some navigation lights and some other gizmos..
I will take some pictures of the frame components later on and keep you posted.
Suggestions are welcome!
Rgds
aBUGSworstnightmare