time for a larger update today
- Lower motor mounts completed with Adafruit Neopixel sticks
and wiring.
The wiring was made from HobbyKing Spektrum Sat extensions, re-pinned in JST ZHR-4 housings.
- Motor mounted to motor mounting plate (don't forget the thread lock fluid!) and rest of motor mount components.
I've exchanged all screws against stainless steel ISO 7380 A2 and ISO 7380 A2 flanged
Here's a good address when looking for screws: http://www.screwsandmore.de/en/HEXAGON- ... -ISO-7380/
- ESC32 placed in the frame. An additional power wiring is running to the front compartment to supply BLDC gimbal and other electronics.
- Detail shot of the right side. All power leads run on the outside of the frame, between the standoffs and the frame walls