bluuuHexa v3 (AutoQuad)

Post your build logs here

bluuuHexa v3 (AutoQuad)

Postby bluuu » Tue May 21, 2013 1:55 pm

It's time to describe my copter.
It will be good reference for testing, tunning and my questions ;)

Some words:

- custom frame HEX+, 74cm between motors, 15cm diameter CP, Alu profiles 12x12mm
- FC AQ 6 rev.2 (FW 6.7 r100 now)
- ESC32
- T-Motor MT2814-10 (770kV)
- props APC 12x3.8 (but I think it's to large for that, will be changed RCTimer 11x5 carbon soon)
- futaba RC
- 2x5000mAh 4S LiPo
- weight RTF - 3,3kg (with gimbal, camera, additional lipo for gimbal etc)

Pictures soon.
Last edited by bluuu on Thu Jun 20, 2013 11:42 am, edited 1 time in total.
bluuu
 
Posts: 1334
Joined: Mon Oct 29, 2012 8:02 pm
Location: Poland, Silesia

Re: bluuuHexa v3

Postby bluuu » Wed Jun 19, 2013 11:32 am

ok, time to rebuild ...

First .. frame.

General guidelines:
- alu 12x12 profiles
- Hex+ and Hex X on the same CP
- FC and GPS antenna protection
- ESCs under motors
- universal mounts for gimbal, battery, etc.

pic soon
bluuu
 
Posts: 1334
Joined: Mon Oct 29, 2012 8:02 pm
Location: Poland, Silesia

Re: bluuuHexa v3 (AutoQuad)

Postby bluuu » Thu Jun 20, 2013 11:41 am

wycinanie.jpg
cnc
wycinanie.jpg (82.99 KiB) Viewed 2522 times


2D vision ;)
bluuu
 
Posts: 1334
Joined: Mon Oct 29, 2012 8:02 pm
Location: Poland, Silesia

Re: bluuuHexa v3 (AutoQuad)

Postby bluuu » Mon Jun 24, 2013 5:19 pm

:) some pieces of G10 ;)

powycinane_male.jpg
powycinane_male.jpg (189.87 KiB) Viewed 2486 times
bluuu
 
Posts: 1334
Joined: Mon Oct 29, 2012 8:02 pm
Location: Poland, Silesia

Re: bluuuHexa v3 (AutoQuad)

Postby chschmid » Mon Jun 24, 2013 6:11 pm

Nice, nice, nice...

Cheers
Christof
chschmid
 
Posts: 1800
Joined: Wed Jul 11, 2012 7:41 pm
Location: Herrliberg, Switzerland

Re: bluuuHexa v3 (AutoQuad)

Postby afernan » Tue Jun 25, 2013 11:19 pm

Where do you buy and cut the G10?
Thanks for the info
Angel
afernan
 
Posts: 1214
Joined: Sat Jul 07, 2012 5:24 pm
Location: Madrid, Spain

Re: bluuuHexa v3 (AutoQuad)

Postby bluuu » Tue Jun 25, 2013 11:28 pm

My friend have cnc plotter. I don't know where he buys G10 but if you want I think he can cut some pieces for you.
bluuu
 
Posts: 1334
Joined: Mon Oct 29, 2012 8:02 pm
Location: Poland, Silesia

Re: bluuuHexa v3 (AutoQuad)

Postby afernan » Wed Jun 26, 2013 9:24 pm

Thanks bluuu, It's very kind from your side. For the moment I don't need, but for sure I'll consider your proposal.

Angel
afernan
 
Posts: 1214
Joined: Sat Jul 07, 2012 5:24 pm
Location: Madrid, Spain

Re: bluuuHexa v3 (AutoQuad)

Postby bluuu » Mon Jul 01, 2013 10:57 am

new pics:

arm1.jpg
arm1.jpg (197.86 KiB) Viewed 2409 times


ESCs covered by "plastik 70"
arm3.jpg
arm3.jpg (238.79 KiB) Viewed 2409 times


arm2.jpg
arm2.jpg (174.13 KiB) Viewed 2409 times


arm4.jpg
arm4.jpg (183.32 KiB) Viewed 2409 times
bluuu
 
Posts: 1334
Joined: Mon Oct 29, 2012 8:02 pm
Location: Poland, Silesia

Re: bluuuHexa v3 (AutoQuad)

Postby bluuu » Tue Jul 02, 2013 12:45 pm

Arms "family" ;)

arms.jpg
arms.jpg (251.68 KiB) Viewed 2387 times
bluuu
 
Posts: 1334
Joined: Mon Oct 29, 2012 8:02 pm
Location: Poland, Silesia

Next

Return to Build Logs

Who is online

Users browsing this forum: No registered users and 1 guest

cron