AutoQuad Forum

Got a few more parts. Soldered together 2 x 470uF 35v low esr capacitors for the ESC32s.

ImageUploadedByTapatalk1360962189.043734.jpg (190.91 KiB) Viewed 18824 times

How's this going? Have you done more?

Hey, not much new. Still waiting for more parts. Last thing I got was the 3DR radio which seems to work great (at least indoors)

ImageUploadedByTapatalk1361713094.789982.jpg (221.56 KiB) Viewed 18797 times

Ok thanks,

I'm logging on each day to see your progress hopefully the parts arrive soon

Got some more parts today

ImageUploadedByTapatalk1362433597.958418.jpg (203.45 KiB) Viewed 18747 times

Engines unboxed

ImageUploadedByTapatalk1362433620.334765.jpg (232.35 KiB) Viewed 18747 times

Soldered 5v jumper and FTDI header (lots of swearing) and flashed latest firmware on the ESC32s.

ImageUploadedByTapatalk1362433711.306198.jpg (202 KiB) Viewed 18747 times

Hooked up one of the ESCs to a engine, Armed and started without problems, now im just waiting for the xoar 13x5 props to start calibrating.

ImageUploadedByTapatalk1362433823.209556.jpg (214.7 KiB) Viewed 18747 times

Nice!!

What model t motors are they?

Tiger MT-4008-12 600kv's , i had planned to buy tiger navigator MN3508-16 700kv, but noody had them in stock and I didn't want to wait anymore.

Today I mounted and soldered the ESCs and engines. Took a few hours but feels good to be done.

ImageUploadedByTapatalk1363132476.074578.jpg (213.97 KiB) Viewed 18714 times

ImageUploadedByTapatalk1363132491.610288.jpg (211.75 KiB) Viewed 18714 times

No the props are not mounted properly, only done for the photo

Size comparison

ImageUploadedByTapatalk1363132521.264911.jpg (225.5 KiB) Viewed 18714 times

Also tested the one wire protocol for uploading esc settings, seems to be working

Now I'm waiting for spacers for mounting the AQ board.

What a nice frame
How do you like the overall strength?

Eager to see it fly.

yeah it seems sturdy

me too!