Build TBS Disco modded to X8 AQ FC and ESC32

[boriss]

R33 and flashing works without any problems. After a reflash things work for 1 to 2 log gin attempts. Than the boards doesn't boot anymore. Occasionally it boots once i don't boot it up with the SD card inserted. Than last stage it won't boot with the SD card inserted or without.

Gonna reflash it again with rev1 and rev2 and see what behavior it shows.

Boris

[boriss]

hmmm reflashed once rev2 once rev1. Board works but not logging now. The usual only 0 kb files. Dont know what to do anymore.

[Jessestr]

Did you let the jumper on?

Try r37 and see if it fixes anything. Try both rev1 & rev2

[boriss]

did i miss something sandisk 32 gb is no supported. But that also can't be the reason for the board not to boot anymore and to need the FW flashed again !

Boris

[boriss]

nah jumper went of every time. I will try r37, there is not link to it ?

[boriss]

also thought that the board when it docent boot anymore might be in flash mode. But if it dosent boot anymore i can't connect it and flash it. It wants the jumpers set !

Boris

[Jessestr]

http://pastebin.com/kFjdKa3R

That's the r37 rev2. Save it as a .hex file

Jesse

[boriss]

Thanks for the help ! Now it's logging again on r66 rev 1. Let's see how long

[Jessestr]

r66?

[boriss]

japp r66, but nothing to promising it logged before without problems and than after several attempts its just stopped ! Lets see just doing a freezing action. Will be back in 2.5 hours with results