Hello guys,
today i discovered a very strange thing...
i have an hexa PLUS, weight about 3.0kg AUW.
t-motor 2814/10 770kv and 11x5 cfk props. driven by esc32 with latest firmware. no calibration.
i configured my motor with the same principle as the wiki. so i ended with that:
motor desc thr pitch roll yaw
m1 FRONT 100 75 0 -100
m2 FRONT RIGHT 100 -100 -100 100
m3 REAR RIGHT 100 -100 -100 -100
...
m8 FRONT LEFT 100 100 100 100
m9 REAR LEFT 100 100 100 -100
m10 REAR 100 75 0 100
NOTE: my yaw is reversed
when i fly, i hear strange noise from the motors and looking at the log on every motor i see clipping...
if i lower the valus in the mixing table for example turning all the 100s in 50s and all the 75s in 25s... the problem seems to be gone but i think i'm only masking the real problem.
what is your experience about ?