something is going wrong with my AQ / settings

[teramax]

M1 front left
M2 front
M3 front right
M4 rear left
M5 rear
M6 rear right

[kinderkram]

I'm by far not more intelligent - but the example in the Wiki is for a HexaX.
On a Hexa+ you'll have 2 motors involved on the roll axis while it's 3 motors on the X and vice versa on the pitch axis.

Once I have my own theory clear I'll post it in the "understanding" thread.

[teramax]

[teramax]

Since starting this tread some time and also some knowledge passed by but i dont know how blind i have been or is it the growing Wiki that some things look more clear then in the past.

Very light small (65cm MtM) Hexa, original AQ Mixing Table, MT4008, 3s3300, 13x5 RcTimer CF Props, AUW 2500g
"not the best kombination, thought"

Maybe i can help some of you understanding.
What u see is a LOG where i slowly lowered the Tilt Angle P from 60 ->50 ->40 ->finaly 20 and also the Tilt Rate D down to 2250 step by step.



Thats by far not the end of the story but the right path.
MäX