Problem with calculations

Static, Dynamic, Log File Analysis, Troubleshooting

Problem with calculations

Postby chris24g » Wed Aug 01, 2012 5:37 am

I am able to generate parameters with step1 but when I try step 2 or 3, the gcs just loads the records but does not output any data.

D:\_Quadcopter\qgroundcontrol_aq\aq_win\cal.exe
--acc
D:\_Quadcopter\_AutoQuad\calibration\012-AQL.LOG
D:\_Quadcopter\_AutoQuad\calibration\013-AQL.LOG
D:\_Quadcopter\_AutoQuad\calibration\014-AQL.LOG
:
D:\_Quadcopter\_AutoQuad\calibration\075-AQL.LOG
cal: loaded 868594 records from 'D:\_Quadcopter\_AutoQuad\calibration\012-AQL.LOG'

Static temperature: min = -23, max = 48

cal: loaded 991291 records from 'D:\_Quadcopter\_AutoQuad\calibration\013-AQL.LOG'

Static temperature: min = -23, max = 52

cal: loaded 813640 records from 'D:\_Quadcopter\_AutoQuad\calibration\014-AQL.LOG'

Static temperature: min = -20, max = 54
chris24g
 
Posts: 120
Joined: Thu Jul 05, 2012 8:07 am

Re: Problem with calculations

Postby sandmen » Wed Aug 01, 2012 7:20 am

This, is all on step2 ?
It take a little bit of time, with starting the calculation.
Thi time depends from pc to pc :-)
sandmen
 
Posts: 997
Joined: Fri Jun 22, 2012 7:25 am

Re: Problem with calculations

Postby chris24g » Wed Aug 01, 2012 5:55 pm

RESOLVED

Reinstalled GCS and computations are running as expected
chris24g
 
Posts: 120
Joined: Thu Jul 05, 2012 8:07 am


Return to Calibration

Who is online

Users browsing this forum: No registered users and 9 guests

cron