the relationship between RC thro and Motor settings
Posted: Mon Feb 09, 2015 10:40 am
Hi, all.
I had two questions regarding radio calibration and motor settings.
First, as Fig. 1 shown, how to let the value of RC thro be 0% and 0?
The current values are 0% and -94.
I had tried many tunings; however, the value of RC could still not be matched.
My RC is Spektrum 7S and AR8000 receiver.
Second, as Fig. 2 shown, based on the abovementioned settings of my RC, I calibrated my motors.
Through my servo tester, the min/max values of RC thro were 1065/1938.
So, how to set the value of Motor/ESC settings?
What are the correct values of Arm/Min./Starting/Max. PWM?
Thanks for help.
I had two questions regarding radio calibration and motor settings.
First, as Fig. 1 shown, how to let the value of RC thro be 0% and 0?
The current values are 0% and -94.
I had tried many tunings; however, the value of RC could still not be matched.
My RC is Spektrum 7S and AR8000 receiver.
Second, as Fig. 2 shown, based on the abovementioned settings of my RC, I calibrated my motors.
Through my servo tester, the min/max values of RC thro were 1065/1938.
So, how to set the value of Motor/ESC settings?
What are the correct values of Arm/Min./Starting/Max. PWM?
Thanks for help.