Step 4b aborts by its own after 2 Loops

Static, Dynamic, Log File Analysis, Troubleshooting

Step 4b aborts by its own after 2 Loops

Postby Florian75 » Fri Oct 18, 2013 7:38 am

Hello,

the Step 4b aborts every time after 2 Loops. Is this o.k. ?


0.109234 0.025694 0.076957 0.000000 0.000000 = 0.211885
Loops: 2

#define IMU_ACC_BIAS_X -1.630703790186 // 0.000000002621 -0.000001863591
#define IMU_ACC_BIAS_Y -1.645444705972 // 0.000000001434 -0.000005298748
#define IMU_ACC_BIAS_Z -1.653035337193 // 0.000000001065 +0.000007032090
#define IMU_ACC_SCAL_X +0.019387711421 // 0.000000001117 +0.000000011613
#define IMU_ACC_SCAL_Y +0.019890864186 // 0.000000001019 +0.000000007932
#define IMU_ACC_SCAL_Z +0.018789914071 // 0.000000001013 +0.000000014909
#define IMU_ACC_ALGN_XY +0.050227808809 // 0.003766450323 -0.003678178029
#define IMU_ACC_ALGN_XZ +0.002217632251 // 0.000106078134 +0.000000023587
#define IMU_ACC_ALGN_YX +0.530906464802 // 0.043584131036 +0.536352131569
#define IMU_ACC_ALGN_YZ +0.016562248427 // 0.000655529386 -0.000066166769
#define IMU_ACC_ALGN_ZX -0.084887908546 // 0.036469469590 -0.134842802230
#define IMU_ACC_ALGN_ZY +0.202652422148 // 0.018803448851 +0.234708615937


- Florian
Florian75
 
Posts: 48
Joined: Wed Oct 09, 2013 7:35 am

Re: Step 4b aborts by its own after 2 Loops

Postby 13brv3 » Fri Oct 18, 2013 2:26 pm

I think these problems usually come down to problems with the log files. If you have multiple dynamic logs, try using them one at a time to see if that makes a difference. If you only have one, then you should probably create one or two more to try. It's really not easy to make a perfect dynamic log file, so it will likely take a few tries.

Cheers,
Rusty
13brv3
 
Posts: 152
Joined: Wed Oct 24, 2012 1:10 pm

Re: Step 4b aborts by its own after 2 Loops

Postby Florian75 » Fri Oct 18, 2013 7:55 pm

Hello Rusty,

thanks for your answer. I have only one dynamic file. I will create an new one and try this.

-Florian
Florian75
 
Posts: 48
Joined: Wed Oct 09, 2013 7:35 am

Re: Step 4b aborts by its own after 2 Loops

Postby Florian75 » Mon Oct 21, 2013 7:44 am

o.k. now it works!
Yesterday evening I took 3 new dynamic files. The 2. file seems to be o.k. Now the calculations are running. In Step 4a the MAE stops dropping after 350 Loops. In the first attempt the MAE dropps after 3000 Loops! I think thats a good sign :-)

- Florian
Florian75
 
Posts: 48
Joined: Wed Oct 09, 2013 7:35 am


Return to Calibration

Who is online

Users browsing this forum: No registered users and 12 guests