AutoQuad Forum

Hello,

next post

I try to understand the dynamic data gathering in the video nr. 2. and the pdf (http://autoquad.org/software-downloads/?did=15). There is shown the rotation and the swing of the copter. I think the shown rotation and the swing of the copter is not the same like the pictures in the pdf (page 5).
He turns around from 0° to 180° and swings the copter again in the start Position. If I believe in the pdf he already have to do this in 90°!?

Do i have to change the next startposition at the same position like the endposition of the privious turn? or do i have to turn to 45° while going to the next start position? (i.e. turning clockwise) So the next startposition would move around.


regards
Florian

I don't think you need to coordinate your own rotation with the frame rotations. Just keep turning slowly and steadily while you rotate the 'copter in your hands. Play a nice slow waltz while you dance, it helps!

-Max

It does not matter to syncronize my rotation and the copter rotation? The PDF suggests it.
I can rotate slowly around my own axis and rotate the copter forward, backward, right, left?

The idea with the music is verry good. I will try it:-)

Florian

Hi Florian

You do not need to coordinate your rotation with the rotation of the copter. It is more important that you turn yourself slow but steady over the whole process.

Cheers
Christof

Hello,

yesterday evening i had a date with my copter
I took a picture of us. You find it under the third Point "dynamic". What do you think? Is it o.k.?

(-Link deleted-)

I turned continiously around me, while turning the copter in all 4 directions. My log file is lager than the file from the documentation. But I think the curves are the same.

In my opinion is the turning around myself the most difficult thing. I need a slow turning table So I can concentrate to swing the copter.


- Florian