Page 1 of 1
Temperatur compensation
Posted:
Sat Aug 31, 2013 8:07 pm
by chschmid
I lost the baro at the crash two weeks ago.
Can I static calibrate the board without baro?
Thanks for advice.
Cheers
Christof
Re: Temperatur compensation
Posted:
Sun Sep 01, 2013 3:28 am
by Kisssys
Yes, baro is not used and it is far enough from the sensor group that changing it should be ok. You could always solder a second sensor on the other pads also and select it.
Re: Temperatur compensation
Posted:
Sun Sep 01, 2013 5:55 am
by chschmid
Thanks for the good news Steve.
Cheers
Christof