LOGGING Stops after several time

Static, Dynamic, Log File Analysis, Troubleshooting

LOGGING Stops after several time

Postby lorda » Sat Jun 15, 2013 11:29 pm

Hi,

when I make logging for 1 minute, around 10k-20K samples are recorded, but when I do the logging for 15 or more I have also 15K or less samples.
But the Green LED is blinking the whole time with 5 HZ...

When the amount of logging samples doesn´t confit (logging for more 15>minutes), the sd card isn´t accepted by the aq anymore an I have to format it...

THX for answering,
(I´m trying now for more then 10 hours).......
lorda
 
Posts: 6
Joined: Sat Jun 15, 2013 2:39 pm

Re: LOGGING Stops after several time

Postby Jdmagoo » Sun Jun 16, 2013 12:35 am

Use a different sd card. Try only an 8gb size card that is class 10. I went through so many cards before finding one that worked.
Jdmagoo
 
Posts: 485
Joined: Sun Feb 17, 2013 8:35 am

Re: LOGGING Stops after several time

Postby bluuu » Mon Jun 17, 2013 9:51 am

Some tips from me with SD cards.

More capacity = more problems.

I trying:
1. Sundisc 32GB class 10 - died at -20 deg in refrigerator
2. Sundisk 16GB class 10 - several stops in logging
3. Toshiba 4GB class 4 - works well
4. Kingstone 4GB class 4 - several stops in logging

Buy 3 different cards and try.
Last edited by bluuu on Mon Jun 17, 2013 10:44 am, edited 1 time in total.
bluuu
 
Posts: 1339
Joined: Mon Oct 29, 2012 8:02 pm
Location: Poland, Silesia

Re: LOGGING Stops after several time

Postby plexus » Mon Jun 17, 2013 10:32 am

plexus
 
Posts: 534
Joined: Tue Jul 03, 2012 3:30 pm
Location: South of France

Re: LOGGING Stops after several time

Postby lorda » Sat Jun 22, 2013 5:28 pm

Hi,

With a Sundisk 8 GB class 10 works very good ! (the change from 16GB to 8 GB made it work!!!!)

thanks for your helpful answers...
lorda
 
Posts: 6
Joined: Sat Jun 15, 2013 2:39 pm


Return to Calibration

Who is online

Users browsing this forum: No registered users and 13 guests

cron