Dynamic CAL with Alexmos board

Static, Dynamic, Log File Analysis, Troubleshooting

Dynamic CAL with Alexmos board

Postby graham_newton » Mon Apr 29, 2013 8:26 am

Hi

I Foresee a problem... I am busy doing my dynamic cals with my brushless gimbal attached and operational.
But with the extreme angles of rotation, the gimbal does not move smoothly and creates some vibrations.
I am pretty sure these vibes from the gimbal wont do my logs any good...

Should I just do them with the gimbal off ?

Thanks
graham_newton
 
Posts: 20
Joined: Tue Jul 03, 2012 3:24 pm

Re: Dynamic CAL with Alexmos board

Postby bn999 » Mon Apr 29, 2013 12:27 pm

Yes, turn it off during calibration.
bn999
 
Posts: 1559
Joined: Thu Jun 21, 2012 11:40 pm

Re: Dynamic CAL with Alexmos board

Postby graham_newton » Tue May 07, 2013 4:34 pm

So i did the calibrations with the alexmos board off.. and as expected, the GPS performance is poor when If fly with the gimbal operational.

Instant toilet bowl when I switch to pos.hold.

Is it not possible to employ an auto mag calibration like on arducopter?
graham_newton
 
Posts: 20
Joined: Tue Jul 03, 2012 3:24 pm


Return to Calibration

Who is online

Users browsing this forum: No registered users and 10 guests