Please take a look at my curves

Static, Dynamic, Log File Analysis, Troubleshooting

Please take a look at my curves

Postby Paul0711 » Tue Apr 02, 2013 10:50 am

i made a new dance due to an other quadroframe. I only took one static and the dynamic file, got an mae 0.12, with all 3 static files > MAE 0.6. Therefore i decided to take the parafile with 1 static file.

3 days later in the air, Copter drifts in one direction. In an other post i read this may happen, when the calibration files are bad.

Is it still ok, or should i give it one more try?

Static files are shown here viewtopic.php?f=35&t=635


The other thing, my quadro is a little bit overpowered, auw 2.5kg with tiger mt2814-11 motors and 13x4 props on 4s, i must lower the throttle factor to 0,3 to get the 700 at hover. Now, if i pull the trigger fully up, it feels very sluggish :cry:

Is there a cheat available, to hover with 50% and have the whole power from the motors available as well ?

Regards

Paul
Attachments
rate.JPG
acc.JPG
all.JPG
Paul0711
 
Posts: 17
Joined: Tue Aug 14, 2012 8:14 am

Return to Calibration

Who is online

Users browsing this forum: No registered users and 11 guests

cron