i made a new dance due to an other quadroframe. I only took one static and the dynamic file, got an mae 0.12, with all 3 static files > MAE 0.6. Therefore i decided to take the parafile with 1 static file.
3 days later in the air, Copter drifts in one direction. In an other post i read this may happen, when the calibration files are bad.
Is it still ok, or should i give it one more try?
Static files are shown here viewtopic.php?f=35&t=635
The other thing, my quadro is a little bit overpowered, auw 2.5kg with tiger mt2814-11 motors and 13x4 props on 4s, i must lower the throttle factor to 0,3 to get the 700 at hover. Now, if i pull the trigger fully up, it feels very sluggish
Is there a cheat available, to hover with 50% and have the whole power from the motors available as well ?
Regards
Paul