Finished my first static calibrations.. Freezer was -18°C
There is in NO WAY anything that could have moved the box. Nobody at home. My street is pretty far away from busy road and there are no moving parts, animals or other things where it was. It was in my basement.
Freeze duration: 2 hour and 15 minutes
Defreezing: 1hour and 30 minutes
Someone have an idea what this could be? Doing another try at the moment.. Hope it's good then. Maybe condensation.. I don't know.. Really weird
Temps:
Already weird? +10°C? It was more than two hours in a very good freezer!
Gyro:
The red and green line of the gyro is the same the hole time.. It's only the blue line that is doing weird (it's the X Axis, just checked..)
Wow just wow.... In the beginning all good.. but what happened then?
Another screenshot was added when the problem is starting
When problem starts:
Y & Z Axis of Gyro are correct....Picture:
Acc:
Have a lot of distubance.. AutoQuad could not move in box..
Mag:
Looks perfect...