Page 11 of 14
Re: what osd to use?
Posted:
Tue Aug 20, 2013 2:46 am
by bluuu
Re: what osd to use?
Posted:
Tue Aug 20, 2013 8:35 am
by Jdmagoo
Nice one!!
You will need to re-load your charset as the characters on your screenshots are a little corrupt.
As I found out with the minimosd both sides of the board need to have power supplied in order to do this. But I'm not familiar with your adoption.
The charset for this version of firmware is called:
MinimOSD_2.3.0.8.mcm
I hope this helps
James
Re: what osd to use?
Posted:
Tue Aug 20, 2013 9:18 am
by kinderkram
Cool, Adam!
Once you're done with the OSD maybe Menno can help on the LED signalling - or will you use your own code which you demonstrated at the MF?
Re: what osd to use?
Posted:
Tue Jul 08, 2014 11:36 pm
by bluuu
Re: what osd to use?
Posted:
Thu Jul 23, 2015 3:45 am
by monkey1
May someone else update the firmware of miniosd extra 2.4 r7xx
here below firmware by James 2.2r681
Re: what osd to use?
Posted:
Sun Jan 10, 2016 3:04 am
by whizz101
How are you guys getting the temp displayed? I am using the osd config tool and temp does not seem to be an option?
Also, it doesn't seem to be possible to get the speed, altitude from take off, or throttle position icons working?
everything else works great, use it on every flight! thanks...
I think i am going to try kissys firmware!
Re: what osd to use?
Posted:
Wed Feb 17, 2016 11:40 am
by Patscherpofel
great stuff, thanks for the effort to share this
I am having problems with the the auto switching of pages when warning happens, I cant switch this off in ct tools
and it allways switches around no matter what I do
another thing , can visible sats be displayed? it only shows 255 all the time
I am using 2.308 , same as the used char set
also I couldnt use arduino to upload the firmware , but it worked with your latest hex file you shared
am I doing something wrong
Re: what osd to use?
Posted:
Wed Feb 17, 2016 7:01 pm
by whizz101
Have a look in the M4 forum at Kissys post about minim OSD. There is a firmware there that shows horizontal position accuacy, and will probably fix your warning problem.
Re: what osd to use?
Posted:
Wed Feb 17, 2016 8:38 pm
by Simson
The disadvantage with the Kisssys firmware is the Baudrate which will not working with the standard Baudrate of the Bluetooth Module.
Therefore I recommend the firmware from James.
Re: what osd to use?
Posted:
Wed Feb 17, 2016 9:31 pm
by Patscherpofel
I had lots of problems with this fw so I indeed changed back to kissys and wont use BT I guess
having the hp accuracy is defiantly nice to have
and something different...
I am having the camera on a gimbal, is there any way to invert the horizon so It shows the angle of the aircraft?
that would help me a lot