AutoQuad Forum

Hi,
I made an unverter between the Futaba RX S7008SB and the AQ
My problem I have no action when I switch the RTH. (all others switches run well)
In the telemetry and in the QGC I see the bargraph activ when I switch in Home or RTH but nothing happen in flight.
Who as a Futaba to help me ?
Thanks

Alain

Hi Alain,

Are you first in PH before you try any Home actions? They only work when in position hold mode, so that also means only with a 3D GPS lock.

If you see the channel graph moving correctly, that should be a good indication that your settings/connections are OK.

-Max

Hi Max
thanks for the reply.
Yes I am in PH and 3D locked.
I think the problem is coming from the Configuration of the Futaba, but I dont see where is the mistake. All seems OK.
You can see the telemetry with the QGC in the attached file. On the SD card the signal is correct.
With the MX20 all is OK.

Solved with a reset of the futaba.