by rput » Thu Jun 05, 2014 8:07 pm
Hi all,
just thought I would post my settings for the DX6i for using the AQ:
DX6I Settings for AutoQuad Use
1. Flaps: Norm +100 and Land -100
2. Mix 1: Gear->Gear, U -100%, SW AIL D/R
3. Mix 2: Flap->Flap, U -100%, SW ELE D/R
4. Reverse: AIL, RUD, FLAP reversed. Others normal
This way the switches should all be down when starting. The functions are as follows:
FLAP 1 - Manual mode
FLAP 0 +ELEV D/R 1 - PH
FLAP 0 + ELEV D/R 0 - Mission mode
AIL D/R 0 - Set Home Position
GEAR 0 - RTH
Hope this helps...
Richard