PWM Tool

Radio, Telemetry, FTDI/USB, ESCs, Motors, etc.

PWM Tool

Postby bluuu » Wed Jan 28, 2015 12:41 pm

I'm working on simple PWM generator for simple esc calibration, pwm reading and sending (maybe PPM too).

First screens:

main.jpg
main.jpg (141.41 KiB) Viewed 7484 times


menu.jpg


calib.jpg
bluuu
 
Posts: 1339
Joined: Mon Oct 29, 2012 8:02 pm
Location: Poland, Silesia

Re: PWM Tool

Postby JussiH » Thu Jan 29, 2015 9:18 am

Id be very interested in building one of those....
JussiH
 
Posts: 2103
Joined: Thu Jun 21, 2012 9:25 pm

Re: PWM Tool

Postby bluuu » Thu Jan 29, 2015 4:51 pm

No problem, i'll put a few PCBs (but I not finished PCB layout yet)
bluuu
 
Posts: 1339
Joined: Mon Oct 29, 2012 8:02 pm
Location: Poland, Silesia

PWM Tool

Postby Luxar » Thu Jan 29, 2015 7:40 pm

Is the Code "Arduino" based? I'll have one of these tiny Displays... ;)
Greetings from Germany - Ralf
Luxar
 
Posts: 53
Joined: Mon Dec 30, 2013 12:20 pm

Re: PWM Tool

Postby bluuu » Thu Jan 29, 2015 7:58 pm

yes, it is :)
bluuu
 
Posts: 1339
Joined: Mon Oct 29, 2012 8:02 pm
Location: Poland, Silesia

Re: PWM Tool

Postby bluuu » Thu Feb 26, 2015 8:44 pm

on the table :)

pcb.jpg
pcb.jpg (129.52 KiB) Viewed 7401 times


Now I must print a case for it
bluuu
 
Posts: 1339
Joined: Mon Oct 29, 2012 8:02 pm
Location: Poland, Silesia

Re: PWM Tool

Postby aBUGSworstnightmare » Fri Feb 27, 2015 9:54 am

Hi Adam,
maybe this 'lil gem would have saved some hours of my life when trying to calibrate the ESC32V3 protos :?
Looking forward for more details!
Rgds
Joerg
aBUGSworstnightmare
 
Posts: 1460
Joined: Fri Jun 22, 2012 5:24 pm

Re: PWM Tool

Postby bluuu » Fri Feb 27, 2015 9:24 pm

Done !

At this moment there is:
- PWM sending in configurable steps by up/down buttons
- PWM reading from reciver and detecting No signal
- Esc calibration option by configurable values and interval between hi and low value

- 2 "out" port
- 1 "in" (RX) port

The tool is powered by 5V from esc or reciver or additional power supply.

If anybody want it .. send me PM.

pwm_tool1.jpg
pwm_tool1.jpg (174.17 KiB) Viewed 7360 times


pwm_tool2.jpg
pwm_tool2.jpg (155.77 KiB) Viewed 7360 times


pwm_tool3.jpg
bluuu
 
Posts: 1339
Joined: Mon Oct 29, 2012 8:02 pm
Location: Poland, Silesia

Re: PWM Tool

Postby chschmid » Sat Feb 28, 2015 7:27 am

Congrats Adam
Nice and handy tool.

Cheers
Christof
chschmid
 
Posts: 1800
Joined: Wed Jul 11, 2012 7:41 pm
Location: Herrliberg, Switzerland


Return to Connections

Who is online

Users browsing this forum: No registered users and 8 guests

cron