AutoQuad Forum

Larry & Menno, thanks to both of you.

Yes its working on 115200 now.. Link connected in QGC and I can see many parameters..

Perfect, now go and fly the thing

Not too fast, still need to finish those weird dancing steps

Another problem with 3dr
Hi.
I bought my AQ 2.0 one year ago with the second delivery.
Unfortunately, from the beginning I have a problem with the data transmission, both at 57600/57600 now also at 115200/115200 ( two 3dr and AQ of course)
When connected 3DR to AQGst, working only Art. hor. any parameters collected.
I thought that this is a faulty 3DR. The plate was washing in IPA checked under a microscope and nothing ..
My settings is the same as in the previous post.
Do you have any idea?

Cheers
Igor

set baudrate to 115200 and airspeed to 128000 then will be ok
I use 3dr too and sometimes transmision is broken for few seconds but after that is reconnected automaticaly

Thanks Adam. This is exactly my set.
Also checked data packets between the modems, transmit correctly.
I changed the power and distance, and nothing...

Hi Igor, a belated welcome to the AQ forums!

Do you have the original 3DR or one of those clones? Please post your complete settings or a screenshot of them.
It might help lowering the airspeed.
http://planner.ardupilot.com/wiki/commo ... m-and-px4/

Hi,
Thank you, my belated log. Two years I read the forum, now decided write. i can not cope with AQ.
I Tests AQ second year, and I have a few observations, I will try to write in another place.
My 3dr bought in RCTimer, is signed by 3DR -V 1.0, on the pcb. (Underneath stickers RC Timer)
According to your suggestions, the Airspeed lowered to 64 - got a permanent connection, then to 32 but still no parameters.

3DR Panel;

prscr3dr.jpg (101.09 KiB) Viewed 22418 times

AQgst:

AQ.3dr Conect.jpg (120.04 KiB) Viewed 22418 times

the same settings as mine ....

Wire connection works ok ?

Unfortunately, all wires good, also filter added. This same set works well with MK. It may be time for XBee ...