Page 3 of 8
Re: 3DR_RadioTelemetry
Posted:
Thu Sep 06, 2012 12:27 am
by LPR
Re: 3DR_RadioTelemetry
Posted:
Thu Sep 06, 2012 8:01 am
by joebar.rc
Nice to have that confirmed as a working telemetry.
You don't have to buy another set for AQ / APM2. You can also set the AQ on 57800, that is enough speed for telemetry data.
Re: 3DR_RadioTelemetry
Posted:
Thu Sep 06, 2012 12:01 pm
by GoFaster
Did you mean 57600?
Re: 3DR_RadioTelemetry
Posted:
Thu Sep 06, 2012 1:24 pm
by joebar.rc
Yah, typing on a 3.8" screen is asking for trouble...
Re: 3DR_RadioTelemetry
Posted:
Thu Sep 06, 2012 2:53 pm
by LPR
Re: 3DR_RadioTelemetry
Posted:
Mon Sep 17, 2012 10:12 am
by afernan
I´ve been using 3DR from some time (in APM2 for the moment) and is much better by far that XBee modules. Distance capability is multiplied by a lot (x5 or more maybe) compared with Xbee.
Angel
Re: 3DR_RadioTelemetry
Posted:
Mon Jul 01, 2013 11:10 am
by qalid
Hello
I'm trying to connect 3DR to my AQ for the first time, I can get to the point where I can see both radio modules are on solid green LED and flashing red, means they are connected.
But in QGC 1.2.1, whenever I try to start Telemetry, the program crashes
in 1.3.1, nothing really happens, I can't see any parameters at all..
However, in both I can get COM port connected @ 57600 baud rate
any one knows what am missing here?
Re: 3DR_RadioTelemetry
Posted:
Mon Jul 01, 2013 11:15 am
by Cookiemonsta
Switch tx and rx?
Re: 3DR_RadioTelemetry
Posted:
Mon Jul 01, 2013 11:18 am
by qalid
Yes I did. I double checked it now.
Re: 3DR_RadioTelemetry
Posted:
Mon Jul 01, 2013 1:02 pm
by afernan
If it crashes, try to close aq-gcs (really close it) and then try again. This use to happen to me