3DR_RadioTelemetry

[qalid]

Larry & Menno, thanks to both of you.

Yes its working on 115200 now.. Link connected in QGC and I can see many parameters..

[joebar.rc]

Perfect, now go and fly the thing

[qalid]

Not too fast, still need to finish those weird dancing steps

[kiteigor]

Another problem with 3dr
Hi.
I bought my AQ 2.0 one year ago with the second delivery.
Unfortunately, from the beginning I have a problem with the data transmission, both at 57600/57600 now also at 115200/115200 ( two 3dr and AQ of course)
When connected 3DR to AQGst, working only Art. hor. any parameters collected.
I thought that this is a faulty 3DR. The plate was washing in IPA checked under a microscope and nothing ..
My settings is the same as in the previous post.
Do you have any idea?

Cheers
Igor

[bluuu]

set baudrate to 115200 and airspeed to 128000 then will be ok
I use 3dr too and sometimes transmision is broken for few seconds but after that is reconnected automaticaly

[kiteigor]

Thanks Adam. This is exactly my set.
Also checked data packets between the modems, transmit correctly.
I changed the power and distance, and nothing...

[kinderkram]

Hi Igor, a belated welcome to the AQ forums!

Do you have the original 3DR or one of those clones? Please post your complete settings or a screenshot of them.
It might help lowering the airspeed.
http://planner.ardupilot.com/wiki/commo ... m-and-px4/

[kiteigor]

Hi,
Thank you, my belated log. Two years I read the forum, now decided write. i can not cope with AQ.
I Tests AQ second year, and I have a few observations, I will try to write in another place.
My 3dr bought in RCTimer, is signed by 3DR -V 1.0, on the pcb. (Underneath stickers RC Timer)
According to your suggestions, the Airspeed lowered to 64 - got a permanent connection, then to 32 but still no parameters.

3DR Panel;

prscr3dr.jpg (101.09 KiB) Viewed 22416 times

AQgst:

AQ.3dr Conect.jpg (120.04 KiB) Viewed 22416 times

[bluuu]

the same settings as mine ....

Wire connection works ok ?

[kiteigor]

Unfortunately, all wires good, also filter added. This same set works well with MK. It may be time for XBee ...