AutoQuad Forum

Posted: **Wed Sep 10, 2014 8:44 pm**

Hi,

now, I got my AQ6 :-)

But the problems already started...
When I connect it to QGroundControl (Linux), I got this error and no data. Flight display is working.
Is this a problem with the SD card? The SD card is a Samsung Pro class 10. FTDI is the one from Flyduino.

Thanks for help,
Jens

Posted: **Wed Sep 10, 2014 9:14 pm**

I don't know why, but now the message is gone and I get data.

Posted: **Wed Sep 10, 2014 9:15 pm**

Good to hear.

Posted: **Wed Sep 10, 2014 9:52 pm**

mm, the message is back. it's only working without any SD-Card :-(

Posted: **Wed Sep 10, 2014 9:56 pm**

Does the card work on other devices? Is it formatted right? Whats the message? Did you check the wiki ?

Posted: **Wed Sep 10, 2014 10:42 pm**

Yes the card works on other devices? The Card is 8GB and has FAT32. The message is:
(MAV 098) SDIO WRITE error != SD_OK

Posted: **Wed Sep 10, 2014 10:44 pm**

Unfortunetely, I don't have any other class10 card at the moment. (I also tested a 16GB class 6 card and got the same message)

Posted: **Thu Sep 11, 2014 4:11 am**

Jenne

Please read this info on which SD cards work best.

http://autoquad.org/wiki/wiki/getting-s ... ed-extras/

Larry

Posted: **Thu Sep 11, 2014 6:25 am**

Yes, I read this info and I bought a card from that list. I have the second one (the Samsung) but it doesn't work.

Posted: **Thu Sep 11, 2014 6:54 am**

Jenne

Try using some alcohol to clean the contacts in the SD holder.

Larry

AutoQuad Forum

SDIO WRITE error != SD_OK

SDIO WRITE error != SD_OK

Re: SDIO WRITE error != SD_OK

Re: SDIO WRITE error != SD_OK

Re: SDIO WRITE error != SD_OK

Re: SDIO WRITE error != SD_OK

Re: SDIO WRITE error != SD_OK

Re: SDIO WRITE error != SD_OK

Re: SDIO WRITE error != SD_OK

Re: SDIO WRITE error != SD_OK

Re: SDIO WRITE error != SD_OK