Re: AutoQuad & Spektrum telemetry
Posted: Tue Apr 08, 2014 1:20 pm
Hi Menno,
was out of the house doing some 'brain surgery'. Here are some pictures of the GPS testing:
Here's what I see:
- Time is missing (need to look at the sketch if it's actually transmitted)
- No of sats stays at 99 --> do you use hAcc here or is it unprocessed data?
- Height is not displayed at all
- Heading is working
- Distance seems to be o.K. since I moved the test-setup from my office to the outside of the house
Will now make some XBUS sniffs and see what's going on!
Joerg
was out of the house doing some 'brain surgery'. Here are some pictures of the GPS testing:
- Test setup: DX10T bound to CamCruiser (AR9020 + TM1000); DX8 bound to AR1000 + TM1000 + Spektrum GPS (badly visible on right side of picture).
The green PCB seen in the copter is a microWii prototype --> my Mav2Telem bridge based on ATmega32U4
Here's what I see:
- Time is missing (need to look at the sketch if it's actually transmitted)
- No of sats stays at 99 --> do you use hAcc here or is it unprocessed data?
- Height is not displayed at all
- Heading is working
- Distance seems to be o.K. since I moved the test-setup from my office to the outside of the house
Will now make some XBUS sniffs and see what's going on!
Joerg