AQ6 problem connecting to Mavlink

Radio, Telemetry, FTDI/USB, ESCs, Motors, etc.

AQ6 problem connecting to Mavlink

Postby Kalmrige » Sat Mar 22, 2014 10:51 am

Hello together,
my name is Marco and iam finally a owner of an AQ6. English is not my motherlanguage so please try to ignore my mistakes. I have a problem by connecting my AQ6 with the GCC and i hope someone here can help me finding a solution. After i mastered flashing the AQ6 i tryed to connect the FC with "Add Link". Its showing me its connected but there are no numbers in the Mavlink window, which are showing me that there is a transfer between pc and fc, like the wiki told me. The whole time the GCC is telling me: "voltage warning 6.9 volts". I made a small video to show you my problem. Really hope someone knows what to do.

http://www.youtube.com/watch?v=JmC0QHz6ar0

Ah btw. i already tryed making the green wire away but its not working.

yours sincerely
Marco
Kalmrige
 
Posts: 2
Joined: Sat Mar 22, 2014 10:35 am

Re: AQ6 problem connecting to Mavlink

Postby sandmen » Sat Mar 22, 2014 1:31 pm

In the video is everything fine.
The wrong voltage reading, you have the wrong hex-file flashed.
sandmen
 
Posts: 997
Joined: Fri Jun 22, 2012 7:25 am

Re: AQ6 problem connecting to Mavlink

Postby Kalmrige » Sat Mar 22, 2014 2:11 pm

Thank u for your answere but i took the newest .hex i could find. If my .hex is the wrong one where can i find the right one?
Kalmrige
 
Posts: 2
Joined: Sat Mar 22, 2014 10:35 am

Re: AQ6 problem connecting to Mavlink

Postby sandmen » Sat Mar 22, 2014 2:15 pm

I think, you load a rev0 into a rev1 board.
That is the reason for the wrong battery voltage.
sandmen
 
Posts: 997
Joined: Fri Jun 22, 2012 7:25 am


Return to Connections

Who is online

Users browsing this forum: No registered users and 24 guests