Bluetooth setup help

Radio, Telemetry, FTDI/USB, ESCs, Motors, etc.

Re: Bluetooth setup help

Postby hogster » Thu Apr 17, 2014 9:02 pm

SUCCESS! :D

I found I had to use the commands listed here:

http://embeddedprogrammer.blogspot.co.u ... odule.html

to be able to talk to it.

I used CoolTerm (Mac serial port tool) and the Flyduino USB UART adaptor to connect to the HC-06 (the adaptor also powered the HC-06). I had to use 9600 initially (all the other settings left at default), and I could then use "AT+BAUD8" to set the baud rate to 115200. I double-checked that the pin was 1234 by setting it using "AT+PIN1234".

I first knew something good had happened because I could now pair successfully to the HC-06 ... although the act of pairing didn't stop the red LED flashing (which confused me a bit). But the Bluetooth system preferences pane said it was Paired.

After selecting 115200 and 'HC-06 DevB' in the GCS software, it now talks! :D

I hope this info will be useful for others trying to set their Bluetooth up – maybe it could go in the Wiki? There is very little in the Wiki with regards to setting up the Bluetooth at the moment ...

Cheers! David
hogster
 
Posts: 239
Joined: Tue Feb 11, 2014 8:59 am

Re: Bluetooth setup help

Postby aBUGSworstnightmare » Fri Apr 18, 2014 8:31 am

Hi David,

good news!

Joerg
aBUGSworstnightmare
 
Posts: 1460
Joined: Fri Jun 22, 2012 5:24 pm

Re: Bluetooth setup help

Postby Texzin » Fri Jan 23, 2015 11:37 pm

Thanks hogster

CoolTerm worked great with with windows
Texzin
 
Posts: 2
Joined: Mon Dec 29, 2014 4:22 pm

Previous

Return to Connections

Who is online

Users browsing this forum: No registered users and 15 guests

cron