Hi all
I've just bought an HC-06 bluetooth module and hooked it up to the FTDI port on the AQ as instructed on the wiki (including adding the jumper to activate the 5V line). I then paired my MacBook with the Bluetooth module and actually had it appearing in the com port list on the GCS. But no matter what settings I used, I couldn't get the two to talk. What settings should I be using when setting up the Comms for the AQ?
Also I'm not sure if the pairing was successful as the only way I could get a 'successful' pairing message was to pair without any passcode - is that how I should be doing it? The other two options are automatic passcode generation and entering your own passcode ...
Many thanks for your help
David