I dosn't have a picture of my copter right now - this is happening on a big frame that is still in developement... some data if someone is interested:
flat octo, 1m diameter, 22mm cfk-tubes
x2212 motors with 11'' props (e-prop style)
ultraESC
Graupner MX20 (GR24)
bluetooth telemetry
3S/4S batteries
AQ+DIMU with hott-firmeware
power distribution and esc seperated from FC by both CFK centerplates (in total >50mm), all wires twisted, PWM lines seperated as far as possible from power-lines
(brushless Gimbal + video transmission)
2,5 kg without camera and batteries
the motor speed with this combination is unfortunately close to the resonance of the arms - so the vibrations are a little bit too high (in my opinion). But it flies well and this will be solved by the use uf bigger motors with larger props - as soon as the other problem is solved