AutoQuad native Graupner HoTT telemetry (update jan 2015)

[mumba]

Nobody any idea?

Sorry if this is a newbie question, but with AQ i am a newbie.....

Marco

[joebar.rc]

Nobody any idea?

Sorry if this is a newbie question, but with AQ i am a newbie.....

Marco

Could you tell something more, because the fw does not change that behavior, parameter setting do.
Are you using quatos, is the license present if so, what are the quatos params (Am1, am2, mot,scale etc etc)
If using pid, also... Params

[mumba]

Just found the problem.........

Default behavior is other ESC, for using onboard esc set MOT_ESC_TYPE to 1, for using PWM connected ESC32, set MOT_ESC_TYPE to 2.


Thank you

[adcam]

hi

how do you connect the Bluetooth module Inside the mx16 remote ?

many thanks

Adolfo from France

[aBUGSworstnightmare]

hi

how do you connect the Bluetooth module Inside the mx16 remote ?

many thanks

Adolfo from France

What do you want to use it for? It's not needed for HOTT telemetry.

[kinderkram]

Hi Adolfo and welcome to AQ!

Are you referring to this?



It uses a cheap BT mudule connected in parallel to the USB internally. Will see if I can find a diagram for the connection...

Norbert

Update: found the instructions for the MX16. You will need to use a BT module at 115.200 baud rate like the ones from Flyduino or Viacopter.

http://fpv-community.de/attachment.php? ... 1368382868

http://fpv-community.de/attachment.php? ... 1368382875

[okallio]

Is this telemetry thing working on all MX/MZ/MC -radios?

I'm planning on getting a new radio to replace my ancient 9C/Spektrum -combo and as I have quite a lot Autoquad and Mikrokopter stuff Graupner/HoTT is quite a strong candidate because telemetry features.

Basically radios to choose from are MZ-18 or MX-20? What would be your suggestion?

BR, Oula

[kinderkram]

Most guys I know use the MX 20 HoTT version.

[whizz101]

Hello all,

Unfortunately I have had some recent crashes and after looking into the logs and discussing it with other autoquad members, The Hott firmware i was using has been blamed. Aparently other german users have been having similar problems and posting about it in the German forums.

See post,
viewtopic.php?f=40&t=4822

Sorry to be a downer, i just thought people should know.

Edit....Well in my case, i do not think it was the Hoot firmware causing my problems. I had the same issues with non-hott firmware.

Tristan