I met two problems when I constructed my AQ6 and ESC32.
My platform:
AQ6+ESC32+CP2102+3S LiPO 5200mAh+QGC(v1.3.0/1.2.1/1.05)
- AQ6
- 1.jpg (210.2 KiB) Viewed 7628 times
First problem: Failing in connecting AQ6 and QGC(v1.3.0/1.2.1/1.05).
As figure shown, the ready/power/debug/gps LEDs were shining.
I connected CP2102 to FTDI port of my AQ6 and QGC(v1.3.0/1.2.1/1.05).
However, my QGC cannot recognize AQ6.
Second problem: Error in ESC32.
For my ESC32, I soldered "Vb."
I connected ESC32 to 3S LiPO battery and AQ6.
However, the error LED of ESC32 was shining.
Please help me to solve the two problems.
Thanks for help.