Although I like Menno's AQ6 extension board I couldn't use it because I use different connectors on my quads. That's why I ended up with my own one.
- large_top.png (186.1 KiB) Viewed 20230 times
- large_bot.png (195.58 KiB) Viewed 20230 times
Here are the details of the board:
- 53x53mm
- ProMicro based to use Menno's Mav2Hott Software
- 12V/1A DC/DC
- 5V/3A DC/DC
- 3.3//0,5A DC/DC
- Current sensor interface
- HOTT port
- X-BUS interface to connect to TM1000 - for Spektrum telemetry (I2C bus bus with level shifter, hopefully supported in the near future)
Will have to make some minor fixes on the silkscreen layer and then I will order the PCB at OshPark (around $22 for 3 pcs),
Anything more to add?