Menno´s Parade of AQ6 Extension Boards - CAN, Current, LEDs

[joebar.rc]

[axelnied]

[kinderkram]

Spräsche Sie Deutsches?
http://fpv-community.de/showthread.php? ... post531192

[axelnied]

Norbert,

Thanks for the ze hint.
Your German though needs some improvement.
Here Lesson One:

[joebar.rc]

DIY CAN-LED-Mav2Hott boards are in...

What is it:
small (58mm) board with 8 ports CAN distribution. CAN bus powered by AQ or Recom.
Onboard arduino for Mav2Hott or Mav2frSky or just for LED control
4 ports high power led strips output with optional ULN2003
4 ports intelliled (WS2812B or other 1 dataline leds)
Powered or non powered currensensor input
HoTT / FrSky telemetry output
2nd mavlink telemetry I/O with resistors on datalines
Optional recom for input up to 6S and 1A output.
FCP-HL mounting holes

So, just the FTDI connection to AQ and 2 wire CAN bus makes a clean wiring to the AQ possible.

P1000477.jpg (332.5 KiB) Viewed 14490 times

[chschmid]

Wow Menno what a pleasure.
Let us know when and where we can get them.

Cheers

Christof

[Jdmagoo]

Wow awesome work!!

Just wondering what the maximum amps the current sensor is?

Also when do we see a vid of it flying??

I would also be interested in purchasing one

Excellent work

[epyonxero]

[aBUGSworstnightmare]

Hi Menno,

awesome! Were to buy (bare PCB is sufficient for me)?? I badly need one of those beauties for my FPV quad!

I will start with the Adafruit NeoPixel sticks (http://www.adafruit.com/products/1426) instead of building a custom LED strip.

Rgds
Joerg
aBUGSworstnightmare

[joebar.rc]