DIY CAN-LED-Mav2Hott boards are in...
What is it:
small (58mm) board with 8 ports CAN distribution. CAN bus powered by AQ or Recom.
Onboard arduino for Mav2Hott or Mav2frSky or just for LED control
4 ports high power led strips output with optional ULN2003
4 ports intelliled (WS2812B or other 1 dataline leds)
Powered or non powered currensensor input
HoTT / FrSky telemetry output
2nd mavlink telemetry I/O with resistors on datalines
Optional recom for input up to 6S and 1A output.
FCP-HL mounting holes
So, just the FTDI connection to AQ and 2 wire CAN bus makes a clean wiring to the AQ possible.
- P1000477.jpg (332.5 KiB) Viewed 14529 times