LPD8806 LEDs....

Radio, Telemetry, FTDI/USB, ESCs, Motors, etc.

Re: LPD8806 LEDs....

Postby Jdmagoo » Sun Jul 07, 2013 6:08 am

Thanks Max will try that now and report back
Jdmagoo
 
Posts: 485
Joined: Sun Feb 17, 2013 8:35 am

Re: LPD8806 LEDs....

Postby Jdmagoo » Sun Jul 07, 2013 6:27 am

Just uploaded and seems to have fixed the erratic speed indications, remains stable at 0kmph whilst on the bench. Thanks again Max.

One question it says the following in the Mav2hott code:

' Mav2HoTT *can* calculate its own home position based on the first GPS 3D fix, but better is to use AQ's home coordinates
By default it is not transmitted, but if you compile the special mavlink message in aq_mavlink.c then you can use this;
#define useMavHome'


Does this mean i need to compile a version of the AQ firmware to turn on the reported home coordinates? Or is this now done automatically, i still cant get the bearing and distance to home to work.

The other issue Ive noticed with the higher firmware versions is the flight timer either doesnt work or counts upwards very slowly (1 sec increments every 15sec or so)

Finally i still cant figure out the lat/long issue

Cheers

James
Jdmagoo
 
Posts: 485
Joined: Sun Feb 17, 2013 8:35 am

Previous

Return to Connections

Who is online

Users browsing this forum: No registered users and 23 guests

cron