by JussiH » Sat Mar 23, 2013 12:39 pm
Has it been like this always?
It may be because the spring holder is not locking the card into place, because your card is very thin. In that case, the solution is to add some tape to the text side of the card to make it thicker. Can you try this, perhaps also make a measurement of the card thickness? An Ideal card is about 0.8 mm thick at least, but I have seen cards down to 0.65 mm and they do not lock into place properly.
I have been in contact with Paul from Flyduino, and if you send the board to me, I will replace the uSD socket. But please try the other thing first.