by Kisssys » Sat Feb 09, 2013 10:41 pm
Bind both your satelite and TM1000 to the same receiver. Take the satelite and plug it into MK as you normally would. Now you need power for the TM1000 that normally comes from the receiver. You see the connection to the MK has the signal line removed, it just their to get 5 volts to power the TM1000, you could do the same on the AQ.
I have three inputs to the TM1000 sensor inputs. One reads the flight pack voltage, another with a rpm sensor reads the rpm of one of the motors and the temp sensor is hot glued to the top of the fets of one of the ESC's fet's.
I don't think my buddy ever looks at rpm but the temperature showed the need for holes in the canopy, and the TX vibrating for low voltage has saved him a couple of times.
Steve
Kisssys