"Networked" AQ

[Lutz]

[afernan]

@Lutz, thx for your help.

I´ve connected a SSH in PC while connecting TP-L to AQ and did "cat /dev/ttyATH0"
I saw chinnese simbols as you sugested (see image attached) .
I´ve tryed again to connec to N7 & N4 w/0 success.

Tried also to use in the qgc (setting/select interface/WLAN/address) 192.168.1.200:2002 no success.

Angel

[Lutz]

[afernan]

GOT IT WORKING!!

Was my bad...see the stupid problem in ser2net.conf
good line: 2002:raw:600:/dev/ttyATH0:115200 NONE ...
bad line: 2002:raw:600:/dev/ttyATHO:115200 NONE ...
(got it? sure you ever had one of this)

of course now the PuTTy/raw on port 2002 works fine. I can see all Mavlink characters running.

Anyway, It works fine in my Nexus 4 with "Aq-gcs2_2.8.5.apk"
...but it doesn´t work in my Nexus7. I´ve tryed different gcs version (2.8.0, 2.8.2, 2.8.5) and no success.

I´m wayting a "Logitech Pro 9000 - Webcam ". I´ll inform about that.

Thanks to all you for your patient and help.
Angel

[chschmid]

Congrats Angel.

[afernan]

Flight test with AQ Networked and 2.4 GHz system (Futaba FP8 + Rx Futaba R6203SB)

I´ve been flying using WIFI network as telemeassurement system.

No issues at all. None interference between 2.4GHz systems (Tx/Rx and WIFI).

DIstance is very high (>100m). For me higher than 3DR system.

The only drawback is that can´t use internet connection to load maps for missions since wifi is connected with TP-Link and is prioritaire to 3G. Any idea about that?

Angel

[Lutz]

I'm planning to use my old stuff here:
http://www.amazon.de/4G-Systems-Box-Mov ... B002HORIOI
with
http://www.amazon.de/4G-Systems-Stick-P ... B003QCJHQC
an an WLAN hotspot at the flight field.
this combination has a runtime above 4 hours and aq and android connect as a WLAN client.

maybe I've to connect an external antenna (have a lot of them here)
for example: http://www.amazon.de/Antenne-Rundstrahl ... B004S2WGLW

Lutz

[Lutz]

omg, I'm so lazy.
meanwhile the 2nd generation has arrived - shame on me, i've to get the h.264 cams running.
time to go further on up the road.

if somebody here wants to have a carambola2 devboard, i ordered one in spare.