QGC: Calibration Buttons (Tare & Mag) not working/active

Ground Stations and utilities for Windows, Linux, Android, & others

QGC: Calibration Buttons (Tare & Mag) not working/active

Postby Snoopy » Tue Aug 15, 2017 4:45 pm

Hi all,

in my GCS the Buttons for doing a Tare/Mag calibration are not activated. Also, the transmitter stick commands for Tare/Mag Calib. do not work. Am I missing something, like putting the AutoQuad into flash mode? Or, has anybody else had this problem before?

I'm using FW v6.7.r224.b1400-rev1 and GCS versions 1.6.3.1 and 1.7.B3 for Windows.

Any advice is highly appreciated.

Best regards,
Stefan
Snoopy
 
Posts: 4
Joined: Thu Sep 08, 2016 11:00 am

Re: QGC: Calibration Buttons (Tare & Mag) not working/active

Postby aBUGSworstnightmare » Sun Aug 20, 2017 12:35 pm

Be sure to use the correct firmware! The one you mentioned is pretty old!

Use the Firmware download wizard or the ftp server to download latest version (FW 7.1.1925 and QGC 1.7b4).

aBUGSworstnightmare
aBUGSworstnightmare
 
Posts: 1460
Joined: Fri Jun 22, 2012 5:24 pm


Return to AQ Software

Who is online

Users browsing this forum: No registered users and 2 guests