AutoQuad Forum

Joerg, nice write-up. I posted that earlier but it was in the middle of your posting marathon so I deleted it.

I made some changes to readme based on your findings, and added a version of your .desktop file -- thanks for that. Besides the installer issue, can you see if that's all correct now?

https://github.com/AutoQuad/qgroundcont ... a1139869a5

(BTW, there was no carriage return in that apt-get line! )

Cheers,
-Max

PS. How do you spell your name officially? I assume with "ö" but you don't sign like that on the forums...

@Joerg:
I'm just finished installing my new RP3 following your very good "donkeys-driver" (direct spanish translation)

Unfortunally, It didn't built in Qt (after 15 min), neither with line commands (attached the error output). Since I'm really new in linux, I want to repeat the full process to check if I miss something...but it sounds good.
ANgel

Hi,

in case somebody want's to try this you can have a look at this uSD card image: https://www.dropbox.com/s/1wn70l1qquhud ... e.zip?dl=0

I'm using a Transcend 16GB class10 card; in case the image should not fit on your uSD simply use a 32GB card (don't miss to run 'sudo raspi-config' and EXPAND FILESYSTEM in such a case).
Make sure your Raspberry Pi uses the latest firmware ('sudo rbi-update').

Joerg

EDIT: This starts vncserver at startup. Passwords if rpivnc

Hi Joerg:
I´m trying to install your image without success. Using a Sandisk Ultra HC I, 32Gb. (This card worked very well in my first installation)

I´ve used the Win32DiskImager.
In the start of RPi, it shows the message: "kernel panic:No working init found..."
Any help it´s wellcome
Angel