Writing mission to AQ fails
Posted: Tue Jul 31, 2012 8:31 pm
I was experimenting with writing/reading missions to the AQ.
After creating a mission, I saved it to file. I can load it into QGC.
When I press write it seems that the data is transmissed to AQ. When I check whats stored in AQ and press read, the list is empty, also for refresh in onboard waypoints.
I also tried ArdupilotMegaPlanner. AMP stores one of several WP's in the AQ.
FW used 6.6 hex from download.
QGC 1.0.1 Alpha RC 18
What do I do wrong. Any Ideas?
Thanks
Christof
After creating a mission, I saved it to file. I can load it into QGC.
When I press write it seems that the data is transmissed to AQ. When I check whats stored in AQ and press read, the list is empty, also for refresh in onboard waypoints.
I also tried ArdupilotMegaPlanner. AMP stores one of several WP's in the AQ.
FW used 6.6 hex from download.
QGC 1.0.1 Alpha RC 18
What do I do wrong. Any Ideas?
Thanks
Christof