Some questions regarding QGC. I'm posting in this forum because it seems most appropriate because there isn't a separate QGC/Ground Station forum.
1. Without the GPS antenna connected, obviously I am not getting a fix indoors. However the HUD displays 3D Fix and MAVLink output seem to indicate 255 satellites visible. Shouldn't it be No Fix and 0 sats? Lat/lon values are correct, all zeros.
2. Is the displayed voltage supposed to reflect the voltage at the AQ input power connector? If so, how should be scaled so it is accurate. Also, in my case, the displayed voltage (e.g. 11.06V) in the little panel where the STM MCU stats are does not match the voltage figure in the HUD (11.1V) unless the latter is rounded up to 1 decimal place
Thanks,
- Felix