Page 1 of 2

AQ QGC 1.6.3 release for Win and OS X

PostPosted: Thu Mar 05, 2015 7:12 am
by Max
Hello,

UPDATE Mar. 6th: QGC version 1.6.2 was found to contain a bug, so this updated version has been released the next day. Windows users: If you already downloaded 1.6.2, you can update just the .exe file by downloading the small hotfix release (2.46 MB).

Version 1.6.2 1.6.3 of the AQ ground control software is available. This release contains mostly bug fixes.

Release notes here (be sure to check the release notes for 1.6.2 also, if you haven't yet).

Windows download
Mac OS X download

As always, source code is @ our repos on GitHub.

Cheers,
-Max

Re: AQ QGC 1.6.2 release for Win and OS X

PostPosted: Fri Mar 06, 2015 3:34 pm
by kinderkram
Thx Max, good work, thumbs up! 8-)

Still missing the buttons for reversing the radio channels, though.

*Duck* :D

Re: AQ QGC 1.6.3 release for Win and OS X

PostPosted: Sat Mar 07, 2015 2:10 am
by Max
Updated to 1.6.3 due to bug, see first post for new links.

-Max

Re: AQ QGC 1.6.3 release for Win and OS X

PostPosted: Mon Apr 13, 2015 8:01 pm
by pilotnbr1
Ive found a possible bug in QGC for Linux. I guess it could possibly be a permissions issue for my QGC build within QT... But I will trow this out there.. Thanks for all the hard work on an amazing compilation of software!

I am unable to load firmware through QGC I get-

dfu-util -a 0 -d 0483:df11 -s 0x08000000:leave -R -D /home/pilotnbr1/Desktop/aqv7.0.r442.b1848-hwv8.6-quatos.bin

invalid dfuse address: 0x08000000:leave

I can only load firmware with command line using sudo-

sudo dfu-util -a 0 -d 0483:df11 -s 0x08000000 -D aqv7.0.r442.b1848-hwv8.6-quatos.bin

Re: AQ QGC 1.6.3 release for Win and OS X

PostPosted: Mon Apr 13, 2015 9:48 pm
by Max
You need to either run QGC as root, or add some rules to udev.

Create a udev rules file. eg:
Code: Select all
sudo vi /etc/udev/rules.d/49-stm32dfu.rules
and put in the following contents:

Code: Select all
SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="df11", MODE:="0666"


Then reload the rules:
Code: Select all
sudo udevadm control --reload-rules


I haven't personally tried this, YMMV, use at your own risk, etc.... :)

-Max

Re: AQ QGC 1.6.3 release for Win and OS X

PostPosted: Mon Apr 13, 2015 9:52 pm
by pilotnbr1
Thanks Max- Ill give it a shot!

Luke

Re: AQ QGC 1.6.3 release for Win and OS X

PostPosted: Thu Aug 06, 2015 11:45 am
by bluuu
found something ;) sorry ... ;)

Missing LogDump file in 1.6.3

Re: AQ QGC 1.6.3 release for Win and OS X

PostPosted: Thu Aug 06, 2015 8:40 pm
by Max
Try a new download Adam, I saw the problem a couple months ago and uploaded a new package. Unless this was on a fresh d-load?

-Max

Re: AQ QGC 1.6.3 release for Win and OS X

PostPosted: Thu Aug 06, 2015 10:51 pm
by bluuu
No, it was old. Today i spotted it. I'll check new one.

Re: AQ QGC 1.6.3 release for Win and OS X

PostPosted: Fri Sep 09, 2016 4:06 pm
by Cookiemonsta
Hi Max, I've got a problem with qgc 1.6.3.1 as well as 1.7.B3 as my windows 10 machine hets stuck every 4 of 5 times I want to connect it via the flyduino ftdi dongle saying WDF_VIOLATION. On the mac side it always says that it can't connect because ot might be already in use but I did a fresh start of the machine so this simply cannot be the explanation for it. Do you know how I can fix the struggle on both sides?

Thank you.