Page 1 of 1
artificial horizon in qgcs
Posted:
Tue Jul 24, 2012 4:16 amby chris24g
the artificial horizon is fine in the pitch axis, but the roll axis seems to be reversed. that is, when i roll right, i expect the horizon to be higher on the right, and vice versa.
Re: artificial horizon in qgcs
Posted:
Tue Jul 24, 2012 7:07 amby jabram
Look at the arrows next to one of the mounting holes, the arrows points forward
Hold the board with the arrows direction pointing away from you.
If you are holding the board backwards [arrow direction pointing toward you] roll will appear to be reversed.
The green line is the aircraft
Re: artificial horizon in qgcs
Posted:
Tue Jul 24, 2012 7:35 amby chris24g
i have the board correctly oriented. the status LEDs are to the rear of the craft
in this screengrab, I am tilting the craft to the right, but the HUD should show the horizon tilting the opposite way
Re: artificial horizon in qgcs
Posted:
Tue Jul 24, 2012 9:18 amby kinderkram
It's a bug in the HUD.
It's already been corrected in the latest revision. So don't worry...
Re: artificial horizon in qgcs
Posted:
Sun Aug 26, 2012 8:21 amby rwijnhov
I am still having the same issue even after loading the new R19 firmware and using the new android app. Is this bug still there?
Re: artificial horizon in qgcs
Posted:
Thu Aug 30, 2012 8:30 pmby rwijnhov
no one?
Re: artificial horizon in qgcs
Posted:
Thu Aug 30, 2012 8:34 pmby GoFaster
I don't think the Android app ever had this bug. How is your AQ board mounted? Corner or edge forward?
Re: artificial horizon in qgcs
Posted:
Thu Aug 30, 2012 10:11 pmby rwijnhov
Yes orientation of the board is good.
Re: artificial horizon in qgcs
Posted:
Thu Aug 30, 2012 10:15 pmby GoFaster
Which orientation, edge or corner?
If edge, make sure IMU_ROT = 0
If corner, make sure IMU_ROT = -45
Regards,
- Felix
Re: artificial horizon in qgcs
Posted:
Fri Aug 31, 2012 6:13 amby rwijnhov
not sure what you mean? My board is straight with led to the back and connectors to the front.