I am observing some strange behavior of the AQ Groundstation:
While I was able to update the firmware (as described in Wiki) without any problems, I am not able to "connect" to the AQ via FTDI.
It says it is connected but no data is coming in, no activity on the FTDI (no LED blinking).
I am running Windows XP 32bit and 64bit (different computers), both with the same result...
I am using this FTDI (bought at Frys) set to 3.3V:
http://osepp.com/products/breakout-boar ... out-board/
Any suggestions?