AutoQuad Forum

Posted: **Mon Jun 16, 2014 10:30 am**

Hi,
I want to transmit my mixing table to the aq board for the firts time. I flash the aq board first, but now, when I select the frame type quad x and press the button "save settings to AQ" there is an alerte : "Possible problems, MOT_FRAME MOT_PWRD_01_P ...."
I don't know what's going on.
1) I connect the qs board with ftdi to pc
2) i connect power
3) I open GroundStation
4)I press "Connect" button
5) select the frame wanted
6) clic on "save settings to AQ"
....
Maybe there is somethink Im doing wrong..

Please help me.

Ju

Posted: **Mon Jun 16, 2014 10:35 am**

And I have the power led red and the ready to green flashing

Posted: **Mon Jun 16, 2014 10:49 am**

Posted: **Mon Jun 16, 2014 10:57 am**

In fact, I find the problem, my connection wasn't good, I used an other port COM, but know I need to find the way to control my motor with the futaba. All my ESC32 are in ready position but nothing happens..

Posted: **Mon Jun 16, 2014 1:05 pm**

AutoQuad Forum

Can't transmit mix table to AQ board

Can't transmit mix table to AQ board

Re: Can't transmit mix table to AQ board

Re: Can't transmit mix table to AQ board

Re: Can't transmit mix table to AQ board

Re: Can't transmit mix table to AQ board