AutoQuad Forum

Ok, understand what you mean.

One possible improvement that can be made. In the planner section, after drawing a polygon and clicking generate. The hatch angle slider should show the proposed path and update as you change it so that you can tweak it without it having to click ok, check it, clear the wps, and go back in and generate a new one if it's not right.

Also the path generated is a zig zag, with one waypoint at each turn rather than two. The way that Droidplanner generates the waypoints is it'll generate a path that has two waypoints at each turn, which creates the spacing between rows. See what I mean in the screenshots.

You can change the value alttitude in HUD to zero meters from real start ground position ?
or make choiced form.

and secound;
HUD is to small; i sugest to choice beetwen full HUD, 50/50 HUD/MAPS or full maps

Yeah, I will have a look into this topic's.
But it will take time. A lot of other projects arround.

good job! Now the Android Tablet will be glued next to the Video-Monitor

What is needed exactly to get the follow me working? "Special fw is mentioned, does someone has such a version?

Sören

Problem with ORBIT on GCS

@Peter:
I´ve notice a small bug that I think comes for the GCS (using 0.2.0)

If you plan an "ORBIT" point and run it, first time runs OK. But if you try to change some parameter on orbit and send again to copter, it performs bad. It makes a kind of "start movement" (see image atached) instead the circular path. I´ve repeated several times that and always happens that.

I guess is something inside GCS that corrupt the orbit execution. This happens at least from fw r220 up to r315

Angel

Hi after using the program for a while, i have to say an excellent tool for the field. On my phone (GalkaxyNote I, custom JB rom) i cant save the parameters, when i select save from the menu nothing happens, when i select load i get a message that no files are found. Another thing is the telemetry screen, the graph was printed ok but the scale on the left wont change it shows -1.6 - 0 all the time, so i cant see what value i have. And for an old man like me it would be great if the fontsize of the graph would be a little bigger, even with goggles it's hard to look at .

Just tried the app with Samsung s2 plus in combi with 3dr radios but it closes as soon as I push connect. Usb connection is selected.
thx