QGC-AQ 1.3.0 (stable) available for Windows & OS X

[Max]

New QGC is up, fixing some bugs and adding CAN support to the motor table setup. Mac OS X users should now be able to run all calibration calculations natively (though the sim3 steps require some simple interaction with a terminal window... hopefully will be resolved in next version). And better compatibility with v6.8 firmware changes.





Cheers,
-Max

QGC1.3-rc2-mixer-with-can.png (129.91 KiB) Viewed 15480 times

QGC1.3-rc2-mac-hack.png (52.51 KiB) Viewed 15480 times

This button will appear if you're running v6.8 r234+ firmware but with old PIDs.

QGC1.3-rc2-PID-update-btn.png (25.38 KiB) Viewed 15480 times

QGC1.3-rc2-PID-update-after-prompt.png (22.88 KiB) Viewed 15480 times

Simple way to verify all the PID changes.

QGC1.3-rc2-PID-update-verify.png (29.03 KiB) Viewed 15480 times

[chschmid]

Hi Max
Awsome.
Thanks a lot for your time and endless work.


Cheers
Christof

[Max]

Thanks Christof. Hopefully not too endless...

But, uh, I forgot to add some new ESC32 params in the RC2 version (for CAN ID and motor direction). So I've updated it to RC2.1 and uploaded new copies. Same download links as above. Apologies to the 11 people who d-loaded it already!

-Max

[teramax]

caught, i was one of the 11
found rotation setting in the esc32 tab, thats absolutly awesome now saves me a lot time when building.

Thanks Max for the updates!

[Max]

Keep in mind that the motor direction setting requires compatible esc32 firmware, r38+. The option becomes disabled if you connect to an esc32 with older fw. Same with CAN ID.

Cheers,
-Max

[JussiH]

Great work, Max - Thanks!

[Jdmagoo]

[Max]

Someone was reporting QGC not working on OS X 10.9... you deleted your post, does that mean it's working now?

I just tried running 1.3 RC2.1 on a fresh install of Mavericks... it prompted me to d-load and install XQuartz first. After installing that, QGC started up OK. Seems a bit slow, but I'm running it in a VM with minimal allocated resources.

-Max

[skew]

I just installed 1.3 RC2.1 on my MBP running Mavericks everything seems to be working fine for me.

[Max]

Since 'tis the season to be out of Beta, here's a "final" version 1.3 of QGC. Just some minor updates and bug fixes.

The release paves the way for further improvements in 1.4, some of which have already been started. Among other things, we hope to have translated versions of QGC available, with German being first on the list.





Happy new year to all!

-Max