hi,
At the beguining I had some difficulties to arm the AQ6. Now I saw with the telemetry an instable curve on the radio throttle and on the radio quality.
If I disconnect all the PWM output (M1 to M6)(on my hexa) the quality is good. That radio quality is also good with 2 connections for example M1 and M2 or two others, but no more. If I connect 3 outputs, the radio quality comes bad like a too big load and it is no possible to arm.
The ppm of the rx is good.
With that the motors dont run very well with a variable speed.
Copy screen is coming.
Please where is the problem, is the AQ or the RX Gr24 ?